This SIG Sauer P320 Carry PRO (X-Series) stands out with its law-enforcement configuration SKU L320CA-9-BXR3-PRO, a 3.9-inch carry-length slide paired with a full-height grip that accepts 17-round magazines, and an optics-cut slide whose removable cover plate carries the rear sight. It is equipped with SIG X-RAY3 tritium night sights and the X-Series grip module, and comes with three 17-round magazines and the original SIG factory hard case.
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Overall Condition: Good - Clean, well-maintained, minor wear marks.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: The pistol shows minor signs of prior use with slight finish loss on the barrel. The chamber is clean, and the rifling is sharp and shiny.
SIG Sauer factory hard case with matching end label (L320CA-9-BXR3-PRO)
Three 17-round steel P320 magazines (mix of units marked Made in Italy and Made in USA; flush baseplates)
The Carry PRO configuration combines a 3.9-inch carry-length barrel and slide with a full-height grip, delivering 17+1 capacity while maintaining a compact slide profile. This example is the law-enforcement configuration identified by SKU L320CA-9-BXR3-PRO and uses SIG’s modular serialized FCU design.
The slide is optics cut and uses a removable cover plate that carries the rear sight, with front and rear slide serrations for confident manipulation. Sighting is via SIG X-RAY3 3-dot tritium night sights, with a bright green-ring tritium front marked "TG-H3" and a two-dot rear integral to the optics-plate cover. The slide finish is black.
The X-Series polymer grip module features an extended beavertail and a mild magwell flare. A flat-faced trigger provides a consistent striker-fired pull. Controls include an ambidextrous slide catch and a left-side magazine release, with no external/manual safety levers present.
A 3-slot Picatinny (MIL-STD-1913) accessory rail supports common weapon-mounted lights or accessories. This pistol ships with three 17-round magazines and the SIG factory hard case. It is manufactured in the USA.
Manufacturer: SIG Sauer
Model: P320
Submodel: Carry PRO (X-Series)
Series: X-Series
Type: Semi-auto pistol
Caliber: 9mm Luger
Action: Striker-fired
Barrel Length: 3.9 in
Capacity: 17+1
Magazines Included: Three 17-round steel P320 magazines (mix of Made in Italy and Made in USA; flush baseplates)
Sights: 3-dot tritium night sights (SIG X-RAY3); front marked "TG-H3" with bright green ring; two-dot rear integral to optics-plate cover
Slide Features: Optics-cut with removable cover plate carrying the rear sight; front and rear slide serrations
Slide Finish/Color: Black
Frame Material: Polymer
Grip Module: X-Series polymer with extended beavertail and mild magwell flare
Trigger: Flat-faced
Controls: Ambidextrous slide catch; left-side magazine release; no external/manual safety levers present
Rail: 3-slot Picatinny (MIL-STD-1913) accessory rail
Country of Origin: USA
Manufacturer Part Number: L320CA-9-BXR3-PRO
Case: SIG Sauer factory hard case with matching end label (L320CA-9-BXR3-PRO)
This SIG Sauer P320 Carry PRO (X-Series) stands out with its law-enforcement configuration SKU L320CA-9-BXR3-PRO, a 3.9-inch carry-length slide paired with a full-height grip that accepts 17-round magazines, and an optics-cut slide whose removable cover plate carries the rear sight. It is equipped with SIG X-RAY3 tritium night sights and the X-Series grip module, and comes with three 17-round magazines and the original SIG factory hard case.
Overall Condition: Very good condition, showing only light, superficial signs of prior handling or use.
Bore Overall Condition: Good - Clean, well-maintained, minor wear marks.
Bore Rifling: Excellent Rifling - Sharp lands and grooves.
Specific Condition Notes: The pistol shows minor signs of prior use with slight finish loss on the barrel. The chamber is clean, and the rifling is sharp and shiny.
SIG Sauer factory hard case with matching end label (L320CA-9-BXR3-PRO)
Three 17-round steel P320 magazines (mix of units marked Made in Italy and Made in USA; flush baseplates)
The Carry PRO configuration combines a 3.9-inch carry-length barrel and slide with a full-height grip, delivering 17+1 capacity while maintaining a compact slide profile. This example is the law-enforcement configuration identified by SKU L320CA-9-BXR3-PRO and uses SIG’s modular serialized FCU design.
The slide is optics cut and uses a removable cover plate that carries the rear sight, with front and rear slide serrations for confident manipulation. Sighting is via SIG X-RAY3 3-dot tritium night sights, with a bright green-ring tritium front marked "TG-H3" and a two-dot rear integral to the optics-plate cover. The slide finish is black.
The X-Series polymer grip module features an extended beavertail and a mild magwell flare. A flat-faced trigger provides a consistent striker-fired pull. Controls include an ambidextrous slide catch and a left-side magazine release, with no external/manual safety levers present.
A 3-slot Picatinny (MIL-STD-1913) accessory rail supports common weapon-mounted lights or accessories. This pistol ships with three 17-round magazines and the SIG factory hard case. It is manufactured in the USA.
Manufacturer: SIG Sauer
Model: P320
Submodel: Carry PRO (X-Series)
Series: X-Series
Type: Semi-auto pistol
Caliber: 9mm Luger
Action: Striker-fired
Barrel Length: 3.9 in
Capacity: 17+1
Magazines Included: Three 17-round steel P320 magazines (mix of Made in Italy and Made in USA; flush baseplates)
Sights: 3-dot tritium night sights (SIG X-RAY3); front marked "TG-H3" with bright green ring; two-dot rear integral to optics-plate cover
Slide Features: Optics-cut with removable cover plate carrying the rear sight; front and rear slide serrations
Slide Finish/Color: Black
Frame Material: Polymer
Grip Module: X-Series polymer with extended beavertail and mild magwell flare
Trigger: Flat-faced
Controls: Ambidextrous slide catch; left-side magazine release; no external/manual safety levers present
Rail: 3-slot Picatinny (MIL-STD-1913) accessory rail
Country of Origin: USA
Manufacturer Part Number: L320CA-9-BXR3-PRO
Case: SIG Sauer factory hard case with matching end label (L320CA-9-BXR3-PRO)
